Dragon Firmwares ⇒ HITRON CODA458X (82-85-87-89) ALPHAWARE REV9
-
- Cablero Ópalo
- Mensajes: 336
- Registrado: 17 Dic 2010, 00:53
- Ubicación: addiu $v1, 0x10 CODE XREF:
- Ha sido agradecido: 1 vez
- Contactar:
HITRON CODA45/46/478X (80-82-85-86-87-89) ALPHAWARE REV9
AlphaWare firmware version REV9 HITRON CODA45/46/478X (80-82-85-86-87-89) (based on firmware 2.0.10.36T5)
nb dragonlord7791 use kofi add me if you need,thankyu
https://ko-fi.com/dragonlord1977
nb : if you have the Software Version 2.0.10.36T6
firmware version installed in your modem,
you can safely use the alphaware mod.If you don't have it,
you have to install the complete modification on your CODA458X modem
AlphaWare supports automatic private moto key decryption
telnet (cloose after 10 minutes)
ssh(cmd or WinScp/Filezilla) (cloose after 10 minutes)
root
dragon
change password ssh (run in cmd)
passwd
new password
-----------------------------------------------------------
back to cli whit exit word
to enter Production type
do
Pro
---------------------------------------------------------------------------------------
web credential alphaware (192.168.100.1:458)
admin
dragon
web credential hitron (192.168.0.1) (rg mode)
cusadmin
password
----------------------------------------------------------------------------------------------------
nb valid command
1 lighttpd -f /etc/lighttpd.conf (alphaware) (starts web server)
2 killall lighttpd (alphaware) (kill alphaware server)
-------------------------------------------------- -------------------------------------------------
snmpset / snmpget / walk works as usual
-----------------------------------------------
Telnet/ssh server can be enable via webgui under tools (close after 10 minutes)
------------------------------------------
snmp can be disable/enable under tools
------------------------------------------
Forced config work s as usual (rename config as forced.configCODA)
---------------------------------------------------------------------------------------------------
Firmware updates should be done in via pyson mode
---------------------------------------------------------------------------------------------------
upload manually certs
Upload certificate via tftp -p -r fw_cert.cer 192.168.100.1 1069 in /nvram/fw/bpi
Upload certificate via tftp -p -r fw_key_prv.bin 192.168.100.1 1069 in /nvram/fw/bpi
change mac address and serial via alphaware webgui
-------------------------------------------------- -------------------------------------------------
Reference AlphaWare rev8 (Puma5 and Puma6) by other commands. Thanks
-------------------------------------------------- -------------------------------------------------- ---------
ALPHAWARE COMMAND FROM SHEEL
FORCE NETWORK ACCESS
echo registered > /proc/net/dbrctl/mode
How to TFTP the isp configuration file (online modem)
cd /nvram/fw/configs
tftp -g -r CONFIG_NAME.cm ISP_TFTP_IP
Set MaxCPE
cd proc/net/
cd dbrctl
echo "20">maxcpe
Configuration location (from ISP display name cm-************ apr****** etc.)
/var/tmp
Force configuration location (load winScp filezilla etc.)
/nvram/fw/configs
Certificate default locations
CM certificate: /nvram/1/security/cm_cert.cer
CM private key: /nvram/1/security/cm_key_prv.bin
mfg cert: /nvram/1/security/mfg_cert.cer
MFG Public Key: /nvram/1/security/mfg_key_pub.bin
Root key: /nvram/1/security/root_pub_key.bin
Download at : (if you need automatic rotator version just ask,thank you)
https://ko-fi.com/s/898031a080
DragonLord greets you all and have a new year full of blessings
nb dragonlord7791 use kofi add me if you need,thankyu
https://ko-fi.com/dragonlord1977
nb : if you have the Software Version 2.0.10.36T6
firmware version installed in your modem,
you can safely use the alphaware mod.If you don't have it,
you have to install the complete modification on your CODA458X modem
AlphaWare supports automatic private moto key decryption
telnet (cloose after 10 minutes)
ssh(cmd or WinScp/Filezilla) (cloose after 10 minutes)
root
dragon
change password ssh (run in cmd)
passwd
new password
-----------------------------------------------------------
back to cli whit exit word
to enter Production type
do
Pro
---------------------------------------------------------------------------------------
web credential alphaware (192.168.100.1:458)
admin
dragon
web credential hitron (192.168.0.1) (rg mode)
cusadmin
password
----------------------------------------------------------------------------------------------------
nb valid command
1 lighttpd -f /etc/lighttpd.conf (alphaware) (starts web server)
2 killall lighttpd (alphaware) (kill alphaware server)
-------------------------------------------------- -------------------------------------------------
snmpset / snmpget / walk works as usual
-----------------------------------------------
Telnet/ssh server can be enable via webgui under tools (close after 10 minutes)
------------------------------------------
snmp can be disable/enable under tools
------------------------------------------
Forced config work s as usual (rename config as forced.configCODA)
---------------------------------------------------------------------------------------------------
Firmware updates should be done in via pyson mode
---------------------------------------------------------------------------------------------------
upload manually certs
Upload certificate via tftp -p -r fw_cert.cer 192.168.100.1 1069 in /nvram/fw/bpi
Upload certificate via tftp -p -r fw_key_prv.bin 192.168.100.1 1069 in /nvram/fw/bpi
change mac address and serial via alphaware webgui
-------------------------------------------------- -------------------------------------------------
Reference AlphaWare rev8 (Puma5 and Puma6) by other commands. Thanks
-------------------------------------------------- -------------------------------------------------- ---------
ALPHAWARE COMMAND FROM SHEEL
FORCE NETWORK ACCESS
echo registered > /proc/net/dbrctl/mode
How to TFTP the isp configuration file (online modem)
cd /nvram/fw/configs
tftp -g -r CONFIG_NAME.cm ISP_TFTP_IP
Set MaxCPE
cd proc/net/
cd dbrctl
echo "20">maxcpe
Configuration location (from ISP display name cm-************ apr****** etc.)
/var/tmp
Force configuration location (load winScp filezilla etc.)
/nvram/fw/configs
Certificate default locations
CM certificate: /nvram/1/security/cm_cert.cer
CM private key: /nvram/1/security/cm_key_prv.bin
mfg cert: /nvram/1/security/mfg_cert.cer
MFG Public Key: /nvram/1/security/mfg_key_pub.bin
Root key: /nvram/1/security/root_pub_key.bin
Download at : (if you need automatic rotator version just ask,thank you)
https://ko-fi.com/s/898031a080
DragonLord greets you all and have a new year full of blessings
-
- Cablero Ópalo
- Mensajes: 336
- Registrado: 17 Dic 2010, 00:53
- Ubicación: addiu $v1, 0x10 CODE XREF:
- Ha sido agradecido: 1 vez
- Contactar:
-
- Cablero Ópalo
- Mensajes: 336
- Registrado: 17 Dic 2010, 00:53
- Ubicación: addiu $v1, 0x10 CODE XREF:
- Ha sido agradecido: 1 vez
- Contactar:
Hi,
can somebody please send me the files or let me know where to find them. All public links are dead...
Thx
can somebody please send me the files or let me know where to find them. All public links are dead...
Thx
-
- Administrador del Sitio
- Mensajes: 54152
- Registrado: 03 Jun 2005, 01:50
- Ubicación: ForoAlejandria.com
- Ha agradecido: 158 veces
- Ha sido agradecido: 37 veces
- Contactar:
Si te gusta ForoAlejandria puedes contribuir a su mantenimiento con una donación
"No se resuelven dudas por privados, las dudas se consultan en el foro y se resuelven entre todos."
Si ves un mensaje fuera de las normas, reporta el mensaje al staff clickando en el icono correspondiente->
Para agradecer, usa el sistema de agradecimientos, click en el icono correspondiente para agradecer a un usuario->
"No se resuelven dudas por privados, las dudas se consultan en el foro y se resuelven entre todos."
Si ves un mensaje fuera de las normas, reporta el mensaje al staff clickando en el icono correspondiente->
Para agradecer, usa el sistema de agradecimientos, click en el icono correspondiente para agradecer a un usuario->
-
- Cablero Ópalo
- Mensajes: 336
- Registrado: 17 Dic 2010, 00:53
- Ubicación: addiu $v1, 0x10 CODE XREF:
- Ha sido agradecido: 1 vez
- Contactar:
im sorry but no public link s for this firmware
visit my kofi shop
https://ko-fi.com/dragonlord1977
Thankyu
--DL
visit my kofi shop
https://ko-fi.com/dragonlord1977
Thankyu
--DL